ELCOS’ Power Generators ready to support the Mains at Orsha Airport, Belarus.
Technical Specifications:
Two power generators in 30’ BOX Container, in Emergency to the mains
Destination:
Orsha Airport, Belarus
Emergency Power Solution.
Elcos is ready to ship two brand new power generators, as a result of the project intended to support the mains at the Orsha airport in case of emergency.
The first one is a GE.PK.450\400.BF+011 and the second one’s in addition is a GE.PK.400\350.BF+011, equipped with Perkins engines and Stamford alternators.
These two Power Generators are built without tank on board, because they’re powered by a 3000 lt external tank.
The tank is placed in separate room inside the container and in addition is equipped with a solenoid valve with adjustable timer.
These Power Generators are installed in 30’ BOX Containers, with acoustic insulation that consequently reduce noise at the level of @75dBA and in addition vertical gravity air inlet louvres.
The power System will be operating at the Orhsa Airport for that reason the buyer has choosen customized painting with red and white stripes.
Furthermore for machine monitoring, a QPE panel with 16-relay module has been installed on board with pre-arranged RS485 serial port for remote communication.
TECHNICAL SPECIFICATIONS:
GE.PK.450\400.BF (+011)
Gen Set Base Frame version BF, PRP 400kVA – 6LTP 450kVA, 1500r.p.m., 50Hz, 400Vac/230Vac,
engine PERKINS type 2206A-E13TAG3, EU Stage 0, with electronic speed governor,
alternator STAMFORD type S4L1D-F (“H/H” 415kVA) brushless with AVR,
QPE-C digital control panel (AMF) without ATS switching on board.
GE.PK.400\350.BF (+011)
Gen Set Base Frame version BF, PRP 350kVA – LTP 400kVA, 1500r.p.m., 50Hz, 400Vac/230Vac,
engine PERKINS type 2206A-E13TAG2, EU Stage 0, with electronic speed governor,
alternator STAMFORD type S4L1D-E (“H/H” 360kVA) brushless with AVR,
QPE-C digital control panel (AMF) without ATS switching on board.
FEATURES
- Self-supporting base-frame.
- Lateral lifting hooks.
- Anti-vibration pads between the engine/alternator and the base-frame.
- Silenced industrial muffler supplied loose.
- Lead-Acid starter Battery with Battery charger 24Vdc.
- Engine pre-heater 230Vdc with thermostat on board
- MCCB Magneto-thermal protection 4P 630A.
- Pre-arranged RS485 serial port for remote communication.
- Routine test integrated into the controller.
- First start-up liquids (oil and anti-freeze for -20°C).
- User and maintenance manual, EC certification, wiring diagrams
- Internal fuel storage tank installation with fire wall including pipes and electrical connections.
- Double-skinned 3.000 lt fuel tank with tear valve.
- Suitable for 37 hours runtime at full (100%) load.
In conclusion the system has been fully customized to reach the customer’s goal.
Emergency Power Systems
There are many reasons to chose an Emergency Power Systems to ensure electricity to the facilities.
The power generators working in Emergency mode grants a reliable power source even when a main failure occurs.
In other words After power returns, the automatic transfer switch transfers the electrical load back to the utility and signals the standby generator to shut off.
Elcos’ power generators are the right Power Systems Solution.
THE CLIENT’S SATISFACTION: OUR MAIN GOAL
SEE OTHER ELCOS’ CUSTOMIZED SYSTEMS